Hang-It-Yourself™

A Cabinet Hanging System - Single: 48" (47 7/8"- 47 15/16") actual

Sale price Price $114.00 Regular price

Shipping calculated at checkout.

HIY

How to Buy?

Cabinet layouts are typically dimensioned in inches so you first need to calculate the total length in inches needed for each wall cabinet layout space rail. Then subtract 2 inches from each layout space total length and select the corresponding rail kit that provides this length. If this calculated rail length exceeds a stock kit size by only a few inches, it is not critical to have a rail run the full distance of a cabinet layout space length. Just be sure to note the affected end of run cabinet and adjust the corresponding cabinet bracket inward a sufficient amount to enable the bracket to fully engage the shortened rail. NOTE: The rails are easily trimmed with a hacksaw.

Hang-It-Yourself™ is a patented, universal fit cabinet hanging and alignment system. This product makes kitchen renovation fast and easy—designed to work on any framed, frameless, pre-assembled, or ready-to-assemble wall cabinets. The sturdy aluminum wall rail ensures a straight and level cabinet installation while providing the flexibility of adjustments prior to final attachment.

Includes:

  • One 48" Wall Rail
  • 4 Cabinet Brackets (One per foot of wall rail length)
  • 3 different length screws, washers, T-nuts and caps for each bracket
  • 4-1/16" Rail Shims and 4-Tapered Cabinet Bottom Shims
  • Snap-Toggles
  • Drill/Driver Pack

Each Hang-It-Yourself kit includes all of the “Rail length-specific” hardware needed to install rails and cabinets on wood frame constructed walls except for the front face attachment screws whose sizes and number vary based on the particular cabinets. See your specific cabinet manufacturer’s instructions regarding recommended fastener size and location for attachment of adjacent cabinet faces.

Metal stud construction, brick, block or concrete walls will require special rail and cabinet bottom attachment fasteners not provided in the installation kits. We recommend SnapToggles for metal studs and Tapcon hex head screws for masonry walls.


Customer Reviews
5.0 Based on 2 Reviews
5 ★
100% 
2
4 ★
0% 
0
3 ★
0% 
0
2 ★
0% 
0
1 ★
0% 
0
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
FG
05/05/2022
Frank G.
United States

great system

very easy for one person to install. thanks

LK
02/09/2022
Lou K.
United States United States

Great Product and Customer Service

The Hang it yourself system is high quality. I was able to install wall cabinets for the first time with confidence and ease. I did contact the support team with a question and they were prompt and knowledgeable. I will most definitely use the product again as it was worth every penny.

x

x